冷再生機的作業速度范圍通常為 4-8米/分鐘 ，具體調整需根據路面損壞情況和再生深度進行優化。以下是關鍵信息：

　　The operating speed range of the cold recycling machine is usually 4-8 meters per minute, and specific adjustments need to be optimized based on the damage to the road surface and the depth of regeneration. Here is the key information:

　　基礎速度范圍

　　Basic speed range

　　冷再生機在常規作業條件下的速度范圍為 4-8米/分鐘 ，此速度可確保銑刨后物料的級配波動較小，維持再生過程的穩定性。

　　The speed range of the cold recycling machine under normal operating conditions is 4-8 meters per minute, which ensures that the gradation fluctuation of the milled material is small and maintains the stability of the recycling process.

　　特殊場景調整

　　Special scenario adjustment

　　網裂嚴重地段 ：需降低再生機組行進速度，同時提高銑刨轉子轉速，以增強對細碎顆粒的處理能力。

　　In areas with severe mesh cracking, it is necessary to reduce the speed of the regeneration unit and increase the speed of the milling rotor to enhance the ability to handle fine particles.

　　總結 ：作業速度需根據實際路面狀況動態調整，常規范圍為4-8m/min，特殊場景需結合轉速優化處理效果。

　　Summary: The homework speed needs to be dynamically adjusted according to the actual road conditions, with a conventional range of 4-8m/min. In special scenarios, the processing effect needs to be optimized in combination with the speed.

　　本文由 冷再生機租賃 友情奉獻.更多有關的知識請點擊  http://www.dzjshs.cn/   真誠的態度.為您提供為的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from Cold Recycling Machine Rental For more related knowledge, please click http://www.dzjshs.cn/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.