在道路的生命周期中，隨著時間的推移和交通荷載的不斷作用，路面會逐漸出現各種病害，如裂縫、車轍、坑槽等。為了恢復道路的使用性能，延長其使用壽命，道路養護工作關重要。而就地冷再生技術，作為一種、且經濟的養護方法，正逐漸在道路工程領域嶄露頭角。

　　In the lifecycle of roads, with the passage of time and the continuous action of traffic loads, various diseases such as cracks, ruts, potholes, etc. will gradually appear on the road surface. In order to restore the performance and prolong the service life of roads, road maintenance work is crucial. On site cold recycling technology, as an efficient, environmentally friendly, and economical maintenance method, is gradually emerging in the field of road engineering.

　　01就地冷再生技術的核心原理

　　The core principle of on-site cold regeneration technology

　　就地冷再生技術（In-Situ Cold Recycling）是一種直接在原路面上進行的道路修復工藝，通過破碎舊路面材料（瀝青層或部分基層），加入再生劑（如泡沫瀝青、乳化瀝青、水泥等），經拌和、攤鋪、壓實后形成新的路面結構層。該技術實現舊料100%循環利用，屬于綠色可持續的道路養護技術。

　　In Situ Cold Recycling is a road repair process that is directly carried out on the original pavement. By crushing the old pavement materials (asphalt layer or part of the base course), adding regenerants (such as foam asphalt, emulsified asphalt, cement, etc.), a new pavement structure layer is formed after mixing, paving, and compaction. This technology achieves 100% recycling of old materials and belongs to green and sustainable road maintenance technology.

　　以泡沫瀝青冷再生為例，其原理是將常溫水注入熱瀝青中，使瀝青瞬間膨脹形成大量瀝青泡沫 。這些泡沫破裂后與集料接觸，化為無數“小顆?！鄙⒉加诩?xì)集料表面，形成粘有大量瀝青的細料。經過拌和壓實，細料填充粗料間空隙，讓混合料達到穩定狀態，從而形成性能良好的路面結構層。

　　Taking the cold recycling of foam asphalt as an example, the principle is to inject normal temperature water into hot asphalt to make asphalt expand instantaneously to form a large amount of asphalt foam. These foam come into contact with the aggregate after breaking and become numerous "small particles" scattered on the surface of the fine aggregate, forming fine aggregate with a large amount of asphalt. After mixing and compacting, fine materials fill the gaps between coarse materials to achieve a stable state of the mixture, thereby forming a high-performance pavement structure layer.

　　02因地制宜：不同就地冷再生技術的選用策略

　　02 Tailored to local conditions: selection strategies for different on-site cold recycling technologies

　　水泥混凝土路面全厚式移動破碎就地冷再生：是指利用移動破碎設備，就地將舊水泥混凝土路面板全厚度破碎成具有一定級配的再生集料（或者通過添加適量的新集料后使再生集料的合成級配滿足公路水泥穩定碎石基層的級配要求），然后添加再生劑（通常是水泥，或者摻配一定比例的其它膠凝結合料）、活性劑（如鋼渣超微粉等，改善再生結構層的性能）、水后，通過再生機就地拌和成水泥穩定碎石混合料，經初壓、整平、終壓、養生，終形成一定厚度的再生水泥穩定（或其它材料穩定）碎石基層（或者中、下面層）。

　　Full thickness mobile crushing on-site cold recycling of cement concrete pavement: refers to the use of mobile crushing equipment to crush the entire thickness of old cement concrete pavement panels into recycled aggregates with a certain grading (or by adding an appropriate amount of new aggregates to make the composite grading of recycled aggregates meet the grading requirements of highway cement stabilized crushed stone base), and then adding recycling agents (usually cement, or mixed with a certain proportion of other cementitious binders), active agents (such as steel slag ultrafine powder, etc., to improve the performance of the recycled structural layer), water, and then mixing them on site with a recycling machine to form a cement stabilized crushed stone mixture. After initial pressing, leveling, final pressing, and curing, a certain thickness of recycled cement stabilized (or other material stabilized) crushed stone base is finally formed. Or the middle and lower layers.

　　瀝青路面就地冷再生雙層連鋪技術：是指使用兩套后出料模式的就地冷再生機機組，依次對原瀝青路面的瀝青面層進行泡沫瀝青就地冷再生和水穩基層進行水泥就地冷再生，在水穩基層冷再生層壓實后（初凝前）鋪設泡沫瀝青冷再生混合料，從而雙層冷再生一次性完成的瀝青路面結構性修復技術。

　　In situ cold recycling double-layer continuous paving technology of asphalt pavement: it refers to the structural repair technology of asphalt pavement that uses two sets of in situ cold recycling machine units in the rear discharge mode to carry out foam asphalt in situ cold recycling on the asphalt surface course of the original asphalt pavement and cement in situ cold recycling on the water stabilized base course in turn. After the cold recycling layer of the water stabilized base course is compacted (before initial setting), foam asphalt cold recycling mixture is paved, so that the double-layer cold recycling can be completed once.

　　03綠色低碳與降本

　　03 Green, low-carbon and efficient cost reduction

　　△效益顯著傳統的道路維修方式往往會產生大量的廢舊路面材料，這些廢料如果處理不當，不僅占用大量土地資源，還會對環境造成嚴重污染。而就地冷再生技術能將舊路面材料100%回收利用，大大減少了新材料的開采，降低了資源消耗和廢棄物排放。同時，冷再生施工過程無需加熱，減少了燃料消耗和有害氣體排放，助力實現綠色低碳的道路建設與養護目標。

　　The traditional road maintenance methods often generate a large amount of waste road materials, which, if not handled properly, not only occupy a large amount of land resources but also cause serious pollution to the environment. On site cold recycling technology can recycle 100% of old pavement materials, greatly reducing the extraction of new materials, resource consumption, and waste emissions. At the same time, the cold recycling construction process does not require heating, reducing fuel consumption and harmful gas emissions, and helping to achieve the goal of green and low-carbon road construction and maintenance.

　　△經濟效益突出使用就地冷再生技術，由于大量利用舊路面材料，減少了新材料的購置成本，同時降低了廢料運輸和處理費用。而且施工工序相對簡化，施工工期縮短，進一步降低了施工成本。據統計，與傳統銑刨罩面維修方法相比，采用泡沫瀝青冷再生技術可節約成本25%左右。

　　The outstanding economic benefits are achieved through the use of on-site cold recycling technology. Due to the extensive utilization of old pavement materials, the purchase cost of new materials is reduced, while the transportation and disposal costs of waste materials are also lowered. Moreover, the construction process is relatively simplified, the construction period is shortened, and the construction cost is further reduced. According to statistics, compared with the traditional milling overlay maintenance method, the use of foam asphalt cold recycling technology can save about 25% of the cost.

　　△社會效益明顯就地冷再生技術施工速度快，能快速恢復道路通行能力，減少施工對交通的影響，降低因交通擁堵造成的社會經濟損失。同時，這種技術可以提升道路的使用性能和服務水平，為公眾提供更、舒適的出行條件。

　　The on-site cold recycling technology has significant social benefits, with fast construction speed, which can quickly restore road traffic capacity, reduce the impact of construction on traffic, and lower the socio-economic losses caused by traffic congestion. At the same time, this technology can improve the performance and service level of roads, providing safer and more comfortable travel conditions for the public.

　　04舊路新顏：就地冷再生技術應用案例

　　04 New Look on Old Road: Application Case of On site Cold Recycling Technology

　　在全國各地，就地冷再生技術已經得到了廣泛的應用。如在湖南省內沅陵S318國道大修項目中，采用了水泥混凝土路面全厚式移動破碎就地冷再生技術。經過持續跟蹤調查，實施效果良好，芯樣完整，與罩面銜接緊密 。還有在廣西貴港市S204路面中修工程中，應用基于同步攤鋪工藝的泡沫瀝青就地冷再生技術，對原路面進行修復。該技術一次性再生一條車道，同時完成銑刨、破碎、添加泡沫瀝青和水、拌和等工序，施工效率高，經濟效益顯著。

　　In various parts of the country, on-site cold recycling technology has been widely applied. In the S318 National Highway overhaul project in Yuanling, Hunan Province, the full thickness mobile crushing on-site cold recycling technology for cement concrete pavement was adopted. After continuous tracking and investigation, the implementation effect is good, the core sample is complete, and it is closely connected with the cover. In addition, in the medium repair project of S204 pavement in Guigang City, Guangxi, foam asphalt in place cold recycling technology based on synchronous paving process is applied to repair the original pavement. This technology can regenerate one lane at a time, and complete milling, crushing, adding foam asphalt and water, mixing and other processes at the same time, with high construction efficiency and significant economic benefits.

　　道路就地冷再生技術憑借其獨特的優勢，為道路養護和修復提供了一種創新且的解決方案。隨著技術的不斷發展和完善，相信它將在未來的道路建設中發揮更加重要的作用讓更多的舊路實現“新生”。

　　The on-site cold recycling technology for roads, with its unique advantages, provides an innovative and efficient solution for road maintenance and repair. With the continuous development and improvement of technology, it is believed that it will play a more important role in future road construction, enabling more old roads to achieve "rebirth".

　　本文由 冷再生機租賃 友情奉獻.更多有關的知識請點擊  http://www.dzjshs.cn/   真誠的態度.為您提供為的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from Cold Recycling Machine Rental For more related knowledge, please click http://www.dzjshs.cn/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.